Email this article Mechatronic test rig with electromagnetic loading for high-speed rotor-bearing systems research
- Authors: Sytin A.V.1, Rodichev A.Y.1
-
Affiliations:
- Orel State University
- Issue: Vol 4, No 2 (2018)
- Pages: 12-17
- Section: Articles
- URL: https://dynvibro.ru/dynvibro/article/view/6508
- DOI: https://doi.org/10.18287/2409-4579-2018-4-2-12-17
- ID: 6508
Cite item
Full Text
Abstract
The present paper considers a mechatronic test rig with electromagnetic loading for high-speed rotor-bearing systems research that consists of the following elements: a gas-dynamic foil bearing, a measuring system, electromagnetic actuators and a control system. Development of a mechatronic test rig involves development of a structural and functional diagram and a layout of a measuring and a control system. The present design allows active control of rotor trajectories that depend on deformation of the elastic elements and timely influence of the control system on the controlled object - a hollow rotor rotating on gas-dynamic foil bearings. The rig also features a universal measuring and control system.
About the authors
Anton Valerievich Sytin
Orel State University
Author for correspondence.
Email: sytin@mail.ru
Cand. tech. sc., associate professor at the department of Mechatronics, Mechanics and Robotics
Russian FederationAlexey Yurievich Rodichev
Orel State University
Email: rodfox@yandex.ru
Cand. tech. sc., scientific staff of 'Modelling of hydro and mechanical systems' research lab
Russian FederationReferences
- Peshti, Yu.V. (1993), Gas lubrication, BMSTU, Moscow, Russia, 382 p.
- Habermann, H. and Liard, G. (1980), “An active magnetic bearing system”, Precision Engineering, vol. 2, issue 3, pp. 139-140.
- Bleuler, H., Vischer, D., Schweitzer, G., Traxler, A. and Zlatnik, D. (1994), “New concepts for cost-effective magnetic bearing control”, Automatica, vol. 30, issue 5, pp. 871-876.
- Wu, A., Cai, Z. and de Queiroz, M.S. (2008), “Model-Based Control of Active Tilting-Pad Bearings”, IEEE/ASME Transactions on Mechatronics, pp. 112-122.
- Savin, L.A. and Solomin, O.V. (2006), Modelling of rotor systems with fluid-film bearings, Mechanical Engineering-1, 444 p.
- Shutin, D.V. and Savin, L.A. (2012), “Modelling of active radial hybrid bearings”, SWSU Bulletin, vol. 1, p. 54-60.
- Deckler, D.C., Veillette, R.J., Braun, M.J. and Choy F.K. (2000), “Simulation and Control of an Active Tilting-Pad Journal Bearing”, STLE Tribology Trans, vol. 47, pp. 440-458.
- Sytin, A.V. (2008), “Solution of the complex problem of calculating the characteristics of radial petal gas dynamic bearings” Ph.D. Thesis, Orel, Russia, 201 p.
Supplementary files
