Email this article ON THE CHOICE OF THE PARAMETERS OF VIBRATION DAMPERS FOR HYDRAULIC CIRCUITS OF CONTROL SYSTEMS
- Authors: Shakhmatov E.V.1, Popelnyuk I.A.1
-
Affiliations:
- Samara National Research University
- Issue: Vol 6, No 2 (2020)
- Pages: 20-25
- Section: Articles
- URL: https://dynvibro.ru/dynvibro/article/view/8204
- DOI: https://doi.org/10.18287/2409-4579-2020-6-2-20-25
- ID: 8204
Cite item
Full Text
Abstract
The article deals with the problem of choosing OF the parameters of vibration dampers for hydraulic circuits of control systems, taking into account the provision of dynamic accuracy of the system after their installation. The concept of a correction factor, which is the ratio of Laplace images of the corresponding parameters of the working medium in the hydraulic circuit before and after the damper installation is introduced. A dependence that associate the relative deviation of the system-controlled parameter with the correction factor is obtained. A condition for checking the effectiveness of the damper, taking into account the preservation of the required quality of regulation in the system is formulated.
About the authors
Evgeniy V. Shakhmatov
Samara National Research University
Email: shakhm@ssau.ru
- Samara University, scientific Adviser
- Department of Power Plant Automatic Systems, chief researcher
- Department of Power Plant Automatic Systems, head
Ilya A. Popelnyuk
Samara National Research University
Author for correspondence.
Email: iap@ssau.ru
- engineer
- Department of Aircraft maintenance, assistant Lecturer
References
- Shorin V.P. Eliminate vibrations in aircraft pipelines . – Moscow: Mashinostroenie. 1980. – 100 p (in Russian)
Supplementary files
