Vol 11, No 7 (2012)

Cover Page

Full Issue

Network digital fiber-optic displacement sensors with closed opticaletwork digital fiber-optic displacement sensors with closet optical chanel

Leonovich G.I., Matjunin S.A., Akbarov R.R., Ivkov S.V., Livochkina N.A., Glushkov A.I.

Abstract

The principle of construction, block diagrams and operation algorithms in digital fiber-optic displacement sensors with a closed optical channel, characterized by high reliability and ease of integration into the passive sensor network.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):9-15
pages 9-15 views

The method of providing heat traceability of wireless devices at the stage of project

Uvaysov S.U., Yurkov N.K.

Abstract

In the article the technique of providing the heat of controllability of wireless devices at the stage of проектировнаия. Shows the results of numerical experimental research of radio equipment of the thermal field on the example of the power supply БП641. Analysis of the results shows that the proposed software identifiesmanufacturing defects reliably.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):16-22
pages 16-22 views

Correct numering of two-pole directed graphs

Popova-Kovartseva D.A.

Abstract

In many problems of the system analysis a graph theory is widely used, which allows using the mathematical apparatus of analysis of binary matrices to obtain important information about the internal structure and properties of the simulated objects. In particular, algorithms for proper numbering directed graphs are used in problems of topological sorting acyclic graphs. The article deals with the universal topological sorting algorithm that allows for the correct numbering, including contour digraphs.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):23-28
pages 23-28 views

Vacuum capacitors with high temperature stability

Ryzhov A.A., Jurkov N.K., Romashin A.A.

Abstract

The article deals with the approach of decreasing of temperature instability in vacuum capacitors using bimetals. The calculations of capacitor capacitance change with bimetallic strip during heating are given.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):29-34
pages 29-34 views

Analysis and modeling of current-voltage characteristics of the tunnel diode

Piganov M.N., Dmitriev V.D., Tyulevin S.V., Kochkina A.V.

Abstract

The analysis of the tunnel diode are carried out, the equivalent circuit is considered, a direct branch of the currentvoltage characteristics is simulated, the calculated dependences of the functions are submitted that make up the current - voltage characteristic.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):35-39
pages 35-39 views

Control of the aircraft hydraulic system technical conditions on the basis of monitoring viscidity values and purity level of fluid power

Kovalev M.A., Borodkin G.V.

Abstract

They offered the diagnostic system for the technical control condition of the aircraft hydraulic systems on the surface area. The values of dispersible particle composition of contamination and viscidity of fluid power are used as diagnostics signs. The mathematics model of the hydraulic system technical condition change and its diagnostics algorithm are worked out.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):40-45
pages 40-45 views

Building foundations of virtual information-based educational environment

Zelenko L.S., Zagumennov D.A., Zinchenko A.O.

Abstract

The article covers the development process of virtual information-based educational environment, substantiates the choice of design and programsolutions, describes the structures of learning course and virtual three-dimensional space.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):46-53
pages 46-53 views

Autocalibration measuring channel on the input channel conversion electric values

Vilop L.E.

Abstract

Considered autocalibration channel conversion of electrical quantities in two-element simulator output power value of the sensor in the measuring systemwith nonlinear sensors.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):54-58
pages 54-58 views

Real-time control algorithms requirements verification mathematical model implementation in visual design computer-aided system

Shulyndin A.V., Tjugashev A.A.

Abstract

This document describes problems of the spacecraft’s control algorithms correct creating. It contains real-time control algorithms math model, verification math model, it explains requirement’s verification problems of the real-time control algorithms and it describes the visual design computer-aided system functioning, that implementing the verification model.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):59-66
pages 59-66 views

Optimization of model positional harakterstik of the electromagnetic sensor of the linear peremeshchny

Tingaev V.S., Matyunin S.A., Mednikov V.A.

Abstract

The paper deals with approximation of positional characteristic of sensor using modified Gaussian function. In order to decrease the error, approximation function coefficients are calculated separately at every interval of interest.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):67-75
pages 67-75 views

Method of production testing of electronic parts

Nasedkin A.V., Tyulevin S.V., Piganov M.N.

Abstract

An algorithm for production tests of electronic components is proposed. The features of dynamic tests are considered. Test exposures are selected. The time of the test for the linear model parameter changes electrical radio products was determined.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):76-84
pages 76-84 views

Distal arterial pulse signal processing method based on wavelet transforms

Kalakutskiy L.I., Fedotov A.A.

Abstract

This article is devoted to the distal arterial pulse signal processing method in the presence of motion artifact based on the multiresolution wavelet transform. The block diagram of the distal arterial pulse signal processing method composed of two stages of signal decomposition and signal reconstruction was proposed. The high efficiency of the proposed distal arterial pulse signal processing method based on discrete wavelet transform over using classical method based on the moving average filter was shown.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):85-90
pages 85-90 views

Research methodology of radio electronic development of early theoretical methods in the design

Zatylkin A.V., Golushko D.A., Lysenko A.V.

Abstract

The article shows the relevance of experimental and theoretical methods in conducting design studies of models of electronic means (REMs). The necessity of the use of expert systems in all phases of the development of REMs. An algorithm for the design of experimental studies REM theoretical method, which allows through the use of expert systems to increase the efficiency of the design decisions.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):91-96
pages 91-96 views

Cell suspensions status monitoring by bioimpedance method

Akulov S.A., Doroshenko R.J.

Abstract

In this paper we evaluate the viability of cell suspensions with the assessment of their bioelectric properties. A method for evaluation of cell suspensions, based on the method of pulse impedance.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):97-102
pages 97-102 views

Calculation of the electromagnetic field in homogeneous hull of on board equipment of space vehicle under influence of electrostatic discharges

Kostin A.V.

Abstract

The method of calculation of the electric and magnetic fields in homogeneous shields for calculations electromagnetic interference inside the hull of on board equipment of space vehicle under influence of electrostatic discharges. Experimental results confirming the adequacy of the proposed method.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):103-111
pages 103-111 views

Diamond film based photonic crysal resonator

Tukmakov K.N., Volodkin B.O., Pavelyev V.S., Komlenok M.S., Khomich A.A.

Abstract

Diamond with embedded color centers is a promising material for realization of quantum information storage mechanisms due to the possibility of creating quantum bits and auxiliary architectures (fibers) in the same plane. This paper presents a method of creating a photonic crystal cavity in the diamond membrane using focused ion beams. The luminescence spectrum of the resonator is shown.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):112-116
pages 112-116 views

Parameters transducers of the blade’s dynamic movements of turbounits based on nonlinear approximation of primary signals

Chernyavskiy A.Z., Danilin A.I., Danilin S.A.

Abstract

New method for the determination of blades oscillation parameters is proposed. The approach is based on the analysis of primary transducers signals distortions using nonlinear approximation techniques. Blades oscillations lead to distortions of primary transducer output signal, non-linear approximation techniques allow to determine blade oscillation parameters.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):117-123
pages 117-123 views

Method to improve accuracy mass measurement fluid in the tank

Solntseva A.V., Skvortsov B.V., Borminsky S.A.

Abstract

Considered two methods to improve the accuracy of measuring the mass of fluid in the tank based on the non-linear interpolation of the experimental calibration data. The first method is to find a transformation function mass and the total parameters of the fluid measured by monitoring with the help of the calibration model of the measurement process. The second method is based on the determination of an individual analytical dependence for the tank, connecting a lot of fluid, with its qualitative and quantitative parameters.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):124-130
pages 124-130 views

Measurement of hydrocarbon fuels quality factor precision increase

Borminsky S.A.

Abstract

The study suggests a new index to assess hydrocarbon fuels antiknock value. This is a complex antiknock index, which depends on fuels' electrophysical parameters. Actual index part characterizes fuel's antiknock value, virtual part stands for its fit (compliance with standards). The research analyses relationship between octane and cetane number, taking into consideration index suggested. The article presents a structure diagramofmeasurement device.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):131-136
pages 131-136 views

Simulation of operaiting cycle by Petry nets

Zelenskiy V.A., Konnov V.P., Schodro A.I.

Abstract

Simulation of operating cycles let curtail develop technology documents time, reduce working losses, make selection equipment optimum, develop flow rate of work. The use of planning and control techniques based on Petri net allows creating modeling system and defining main parameters of process. An example of a problem solution is given.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):137-142
pages 137-142 views

Theoretical basis of directed energy transmission pulses in stationary and moving media

Skvortsov B.V., Skvortsov D.B., Malysheva–Strojkova A.N.

Abstract

The work is described mathematically by an energy field created by emitting a pulse as it propagates in an inhomogeneous absorbing medium. We give a three-dimensional mathematical description of the algorithm and the propagation of pulse signals sent in inhomogeneous absorbing stationary and moving media. Determined by the pulse energy and the group velocity. Changing the amplitude and spectral composition of the pulse passing through the medium under investigation provides diagnostic information about the environment.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):143-151
pages 143-151 views

Analysis of models of fuel elements while using of surface mountng

Knyazeva G.N., Krasnoshchekova G.F., Tyulevin S.V.

Abstract

This paper presents the thermal models of different fuel components that are attached in various ways to the board and calculations of their heat resistance are given below. Also in the analysis of the thermal resistances a great attention is given to the calculation of the thickness of thermal paste. It is shown that the thickness of the paste layer depends on the gap between the contacting surfaces.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):152-155
pages 152-155 views

Control device zener diode

Tyulevin S.V., Kozlova I.N., Shopin G.P., Arkhipov A.I.

Abstract

The article describes a device control, allowing to make culling dual-anode diodes. The proposed device has a high accuracy and reliability of the control. The device allows to set different rates of change of the output voltage bipolar voltage ramp generator.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):156-160
pages 156-160 views

Thermal medical software hardware-based thermal imager COX CX - 320U

Davydov I.E., Agafonov A.N.

Abstract

The development of medical thermal imaging hardware and software system is considered. The basic characteristics, the main window of the program and its capabilities are performed. The prospects for the development of the developed complex are considered.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):161-165
pages 161-165 views

Thin coating for printed circuit boards in industrial production technology of modern equipment

Erendeev J.P.

Abstract

Considered the most widely used in modern electronic industry types of coatings. Comparative evaluation of finishing coatings of printed circuit board electronic components. Assessing the impact of design parameters on the performance of PCB coatings.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):166-177
pages 166-177 views

Implementation of multi- and hypermedia as an innovative way of creating new competency in teaching students and technicians manufacturing and services

Nechitailo A.A., Nechitailo S.A.

Abstract

The article discusses the need for the existing conditions and the introduction of multi-and hypermedia benefits in production and post-production processes of various sectors of the economy, and in the number of engineering and rocket engineering. The necessity of multi-and hypermedia tools in teaching students, training of technical and production staff, as well as service workers.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):178-182
pages 178-182 views

Differential bynary optical-mechanical sensors for automated management and control systems

Korban D.V.

Abstract

Considered are the peculiarities of their design and application binary optical-mechanical sensors differential type for the automated control systems and control. Analyses advantages and disadvantages of this decision, the conditions of use of sensors, made the calculation of the information capacity of the system. It is shown that the modes of operation of the sensor to the effect of a number of operational factors.

VESTNIK of Samara University. Aerospace and Mechanical Engineering. 2012;11(7):183-188
pages 183-188 views

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies