Search

Issue
Title
Authors
Verification of a transonic stage CFD model for assessing the erosion wear influence on the operation of the axial compressor
Blinov V.L., Zubkov I.S.
Ensuring vibration characteristics of reactor plant centrifugal pumping equipment
Savchuk D.V., Bescherov D.E., Kulikov D.A., Panov V.A., Patrushev V.L., Porfiriev M.S., Soloviev S.A.
Comparative analysis of turbulence model influence in numerical simulation of an experimental radial compressor stage
Eremenko V.V., Mikhailov A.E., Mikhailova A.B., Goryukhin M.O., Krasnoperov D.G.
Leader competition in biological and social systems
Pivovarova A.S., Steryakov A.A.
Calculation of spatial distribution of energy of a complex radiator
Yevdokimov I.Y., Nikolaenko V.S., Filippov G.S., Yashchenko B.Y.
Designing an active electronically scanned array as part of onboard equipment of a high-speed radio communication channel
Zhdanov E.R., Slavyanskiy A.O., Kharina O.S., Shpack A.V.
Survey of the flight efficiency of a long-haul aircraft under uncertainty of tasks
Markiewicz P.
3d virtual simulation and casting process optimization of part GTE "Swirler of II duct" with using computer technologies
Vdovin R.A.
Simulation modeling of stock markets
Steryakov A.A.
Creative 2D-modeling
Bykov A.V., Karabcheyev K.S.
JSC “ODK” experience in implementing digital twin technologies in the design of gas turbine engines
Vinogradov K.A., Nikulin A.S., Shmotin Y.N.
Small-sized two-coordinate sensor of the Sun’s angular position with enlarged field of view
Dyuldin R.S., Blinov V.D.
Constructing simulation models of self-similar telecommunication traffic
Blagov A.V.
Method of automated arrangement of devices in a spacecraft compartment taking into account connection to interface connectors of feed-through plates of an on-board cable system
Belyakov A.A., Prihodko V.I., Shulepov A.I.
Method of individual selection of parts for selective assembly of electrohydraulic servo drives
Medvedev A.V., Khalatov E.M.
Validation of the “stage – diffuser” system numerical study and its use for design modernization
Cherkasova M.G., Semakina E.Y., Chernikov V.A.
Modeling of dynamic processes in micromechanical inertial sensors and their components using specialized software
Barulina M.A., Pankratov V.M.
Verification of aero-engine numerical rotor models based on virtual static structural and modal tests
Shaposhnikov K.V., Degtyarev S.A., Leontiev M.K., Anisimov S.V.
Special features of assessing the strength of nuclear reactor equipment under dynamic loads
Lonin K.A., Panov V.A., Patrushev V.L., Savchuk D.V., Soloviev S.A.
Main approaches and features of the design of aircraft hydro-mechanical control systems
Petrov P.V., Tselischev V.A., Kuderko D.A.
Step-by-step simulation of wear of working surfaces in roller bearings
Klebanov Y.M., Murashkin V.V., Brazhnikova A.M.
Ballistic analysis of a mission to Jupiter’s moon Callisto with landing on the surface
Kovalev V.V., Marchenko A.D., Starostina T.V., Sharipova A.R.
Computer-aided system of virtual gas turbine engine testing
Tkachenko A.Y., Rybakov V.N., Krupenich I.N., Ostapuk Y.A., Filinov E.P.
Three-dimensional inhomogeneous thermal fields of the “Photon-Amur 2.0” payload electronic board developed for nanosatellites
Fomin D.V., Barulinа M.A., Golikov A.V., Strukov D.O., German A.S., Ogorodnikov A.A.
Life of gas turbine engine components under corrosive exposure
Pivovarova M.V., Gladkiy I.L.
The numerical modelling of processes in combustion chambers of low thrust rocket engines
Salich V.L.
Determination of large-size liner impedance based on numerical simulation of sound propagation in a duct with specified azimuthal modal structure
Korin I.A., Palchikovskiy V.V., Pavlogradskiy V.V.
Unstady heat-mass-transfer and fuel distributions in flows downstream the gas-dynamic flame holder
Tretyakov V.V., Sviridenkov A.A.
Modeling in management systems
Krasnoschekov A.D., Tyulevin S.V., Kozlova I.A., Tokareva A.V.
Analysis of combustion models applicability for designing combustion chamber with a large number of nozzles
Mingazov B.G., Yavkin V.B., Sabirzyanov A.N., Baklanov A.V.
Numerical and experimental study of the strength of fabric carbon-epoxy composite structures
Komarov V.A., Kishov E.A., Charkviani R.V., Pavlov A.A.
Numerical simulation of tonal noise of a bypass engine fan stage
Pyatunin K.R., Arharova N.V., Remizov A.E.
Algorithm of clock synchronization and evaluation of noise power invariant to multipathing and the kind of modulation
Khalilov R.R.
Simulation of manufacturing processes within the concept of «lean production»
Smelov V.G., Kokareva V.V., Shitarev I.L.
Universal approach to the description of working medium chambers for simulating hydraulic and pneumatic systems
Timofeyev Y.M., Khalatov E.M.
Multisprayer low-emission combustion chamber of modern turbojet engines – N. D. Kuznetsov’s creative heritage
Bantikov D.Y., Vasilyev V.I., Lavrov V.N., Tsibisov Y.I., Matveev S.G., Orlov M.Y., Zubrilin I.A.
Research and optimization of parameters of a system controlling the process of tube inside surface coating
Skvortsov B.V., Zaretskaya M.I., Kurylyova P.A.
Numerical investigetion of a non-contacting finger seal
Temis Y.M., Selivanov A.V., Dzeva I.Y.
The use of regression models for estimating the standards of electric power losses in its transfer by territorial network companies
Goldshtein V., Kubarkov Y., Rygalov A., Revyakina E., Stepanov V.
Complex approach to mechanical tests of executive automatic units of space vehicles
1 1., 1 1., 1 1.
Modeling of the heat exchange processes
Limanova N.I., Mamzin E.A., Matveev S.G.
Simulation of automatic systems of controlling space vehicle drives
Zhuravlyova Y.V.
Influence of the turbine ignition, flame tube suspension and nozzles on the combustion chamber characteristics
Matveev S.G., Orlov M.Y., Zubrilin I.A.
Analysis of contact interaction of polymer honeycomb core and CFRP base layers in sandwich-core constructions
Pavlova S.A.
Enhancement of efficiency of casting processes in production of parts of aircraft engines by way of action of pulse-magnetic field on melt
Chernikov D.G., Glouschenkov V.A., Igolkin A.J.
Mixing processe research in 10…15 N thrusters
Salich V.L., Semkin E.V.
Analysis of the mechanism of fatigue crack arrest in a cylindrical notched specimen
Sazanov V.P.
Research of liquid outflow from low-emission swirl injectors of a low-thrust liquid rocket engine
Semkin Y.V.
Mathematical modeling of interaction a high-frequency torch discharge with construction elements of radio equipment
Kostin A.V., Piganov M.N., Stolbikov A.V.
Using an ionization probe removed from the sparking plug for the development of a two-zone ICE combustion model
Ivashin P.V., Rybakov M.P.
The effect of the way of setting boundary conditions on the results of modeling a flow at the flameholder outlet
Kolomzarov O.V., Anisimov V.M., Zubrilin I.A.
Development of methods of modeling and computer aided design of gas turbine engines
Krivosheev I.A., Kozhinov D.G.
Analysis of the stressed state of high-speed extrusion process
Kostyshev V.A., Pityugov M.S.
Analysis of contact stresses in drawing round products
Kargin V.R., Kargin B.V., Kolesnikova S.Y., Sergeev Y.A.
Emission characteristics and temperature non-uniformity at the outlet of the gas turbine engine combustion chamber
Sabirzyanov A.N., Yavkin V.B., Alexandrov Y.B., Markushin A.N., Baklanov A.V.
Numerical investigation multifuel combustion gas turbine combustion chamber module
Malygina M.V.
Increasing the information content of optical coherence tomography skin pathology detection
Zakharov V.P., Larin K., Bratchenko I.A.
Using statistical Markov models for the analysis of electromagnetic compatibility of autonomous electric installations
Kubarkov Y.P., Goldshtein V.G., Inahodova L.M.
Statistical analysis of a capsule’s motion during its reentry into the atmosphere with the aid of a space tether system
1 1., 1 1.
Ways 3D parametrization TJ blades for use CAD/CAM/CAE packages
Smelov V.G., Shitarev I.L.
Mathematical modeling of dynamic processes in a hydraulic drive with a discrete regulator of liquid flow
Shakhmatov Y.V., Gimadiev A.G., Sverbilov V.Y., Sinyakov A.F.
Vortex wind power plant
Biryuk V.V., Krasnorutskiy A.S.
Aspects of simulating stable low-cycle fatigue crack growth in the main parts of aircraft gas turbine engines
Ryabov A.A., Mokhov K.Y., Voronkov O.V., Kudryavtsev A.Y., Museev A.A.
Research of restrained bending of aircraft parts with curved sides
Gromova E.G., Moiseev V.K., Sharov A.A., Lomovskoi O.V., Mantusov М.N., Plotnikov A.N.
Enhancement of efficiency of casting processes in production of parts of aircraft engines by way of action of pulse-magnetic field on melt
Chernikov D.G., Glouschenkov V.A., Igolkin A.J.
Development of blend composition of aviation kerosene surrogate for the simulation of workflow of gas turbine engine combustion chamber
Matveev S.G.
Computational and experimental research of exhaust gas treatment systems
Galevko V.V., Rakhmatov R.I.
Mathematical modelling of the working process of a hot gas pressure feed system
Salich V.L.
Calculation of parameters of the Deal–Grove model for the oxidation of silicon
Aizikovich A.A., Demakov Y.P.
Specifying the dimensions of the reverse current area of a 3-D gas-turbine engine combustion chamber model using the ANSYS FLUENT software
Biryuk V.V., Orlov M.Y., Zubrilin I.A., Sinegovskiy Y.A., Krivtsov A.V.
Rail electromagnetic accelerators with an external magnetic field
Sukhachev K.I.
Development of methods of designing modern gas turbines
Inozemtsev A.A., Khairulin V.T., Tikhonov A.S., Samokhvalov N.Y.
Role of volume modeling in preparation specialists for innovative mechanical engineering
Ermakov A.I., Chempinsky L.A.
Log-periodic oscillations in hierarchical models
Pivovarova A.S.
Model of the main worm of milling cutters for gear cutting
Androsov S.P., Brailov I.G., Vizigin D.V.
Automated generation of structural members of a spacecraft thermal model
Kulikov D.S., Shatin A.A., Velmisov I.G.
Generation of control programes for disposable unmanned aircraft vehicle propulsion system by means of dynamic characteristic
Mikhailov A.Y., Akhmedzyanov D.A., Akhmetov Y.M., Mikhailova A.B.
Kinematic and dynamic analysis of the basic mechanism of the Wankel engine, based on its vector model
Kosenok B.B.
Mathematical model of complex spatial deformation of rotor blades during helicopter arbitrary motion
Girfanov A.M.
Modeling stable growth of fatigue cracks in aero engine turbine discs under simple and complex loading cycles
Tumanov N.V., Lavrentyeva M.A., Cherkasova S.A., Servetnik A.N.
A model of Markov random field in texture image synthesis and analysis
Plastinin A.I., Kuprijanov A.V.
Analysis of the results of fatigue tests of cylindrical specimens with fillets using the method of finite element modeling
Vakulyuk V.S.
Influence of the reliability of Earth remote sensing spacecraft onboard systems on the monitoring of imaging periodicity
Kirilin A.N., Akhmetov R.N., Kurenkov V.I., Kapitonov V.A., Stratilatov N.R., Lokhmatkin V.V.
Gas-dynamic losses in the flow part of the channel charge of a solid-propellant rocket engine
A. N. Sabirzyanov A.N., Khamatnurova C.B., Kuzmin V.V.
Mathematical model of turbofan engine weight estimation taking into account the engine configuration and size
Avdeev S.V.
Training for innovative engineering through through parametrization
Balyakin V.B., Ermakov A.I., Chempinsky L.A.
Influence of the geometry fidelity of resonant sound-absorbing liner samples on their acoustic characteristics
Kustov O.Y., Khramtsov I.V., Bulbovich R.V.
Selecting a squeeze film damper model for solving problems of gas turbine engine rotor dynamics
Leontiev M.K., Kutakov M.N.
Peculiarities of computer modeling of the working process in small gas turbine engines
Kuz'michev V.S., Tkachenko A.Y., Ostapyuk Y.A.
Simulation of wire manufacturing production cycle
Haymovich I.N., Skripachyov D.G., Kolesnikova S.Y.
Vortex gas wind-driven power plant for supplying compressor stations with electrical energy
Biryuk V.V., Zubrilin I.A., Krasnorutskiy A.S.
Application of dynamic modeling to the evaluation of influence of strengthening treatment on fatigue resistance
Kostichev V.E.
Simulation of operaiting cycle by Petry nets
Zelenskiy V.A., Konnov V.P., Schodro A.I.
Selection of sites and angles for placing star coordinators of remote sensing satellites
Akhmetov R.N., Kurenkov V.I., Stratilatov N.R., Fedorenko O.G., Shilov L.B.
Modelling system of cooling nozzle-sprayer hydrogen steam generator
Lazarenko I.N., Prigozhin A.A., Shmatov D.P.
Resonant method of accelerating non-magnetic materials
Syomkin N.D., Piyakov A.V., Voronov K.Y., Sukhachev K.I.
Solving tasks of control and targeting for remote sensing devices by systems of processing and analysis of visual information
Sbrodov V.V., Sviridov V.P., Safronov S.G.
Numerical simulation of the working process in a vortex tube with an additional stream
Vasilyuk O.V., Piralishvili S.A., Shaykina A.A.
Two-dimentional axial rotor compressor off-design performance prediction model with the use of simulation methods and tools
Mikhailova A.B., Akhmedzyanov D.A., Akhmetov Y.M., Mikhailov A.Y.
Transformation of longitudinal deformation wave at the boundary of conjugation of bars with an elastic element
Manzhosov V.K., Novikova I.A.
1 - 100 of 192 Items 1 2 > >> 

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies