Email this article 
Wave gearing in valve electric drives
- Authors: Itbayev V.K.1, Prokshin S.S.1, Gromakovsky D.G.2, Vasilyev A.V.3
-
Affiliations:
- Ufa State Aviation Technical University
- Samara State Technical University
- Togliatti State University
- Issue: Vol 8, No 4 (2009)
- Pages: 123-127
- Section: MECHANICAL ENGINEERING AND POWER ENGINEERING
- URL: https://journals.ssau.ru/vestnik/article/view/842
- DOI: https://doi.org/10.18287/2541-7533-2009-0-4(20)-123-127
- ID: 842
Cite item
Full Text
Abstract
Mechanical diagram and design of an electric drive for cut-off valves based on wave gearing is proposed. The drive provides mass reduction, maximum moment increase, element position control, deviation in extreme positions. Two standard sizes of the drive are realized and tested.
Keywords
About the authors
V. K. Itbayev
Ufa State Aviation Technical University
Author for correspondence.
Email: okmim@ugatu.ac.ru
Russian Federation
S. S. Prokshin
Ufa State Aviation Technical University
Email: okmim@ugatu.ac.ru
Russian Federation
D. G. Gromakovsky
Samara State Technical University
Email: pnms3@mail.ru
Russian Federation
A. V. Vasilyev
Togliatti State University
Email: avassil62@mail.ru
Russian Federation
References
Supplementary files
