Research of gas turbine engine operation in dust-filled atmosphere


Cite item

Full Text

Abstract

The article describes the experimental data on the effect of erosion the turbomachines elements under the influence solids on the engine performance. The analysis was performed for the generator of compressed air for the aggregate of cleaning pipelines and the gas jet treatment plants temporary technological railways. The aggregate of cleaning pipelines was operated under conditions of high concentrations of dust in the air - in the semidesert. Both plants are based on the converted aircraft twin-shaft turbojet engines. According to the model of erosive wear was set, that the depth of erosion depends on the dimension of the engines. Also shown is the ability to detect impending failure of the engine working in a dusty atmosphere, based on trend analysis of its parameters using various statistical smoothing options: simple linear trend, exponential trend, damped trend. Revealed that the first of the considered parameters controlled workflow approach to engine failure reacts high pressure rotor speed. Timely detection of trends in parameters due to the development of a number of irreversible processes will predict current and stable operation of the critical state of gas turbine engines, the corresponding loss of gasdynamic stability of the engine, so as to use the work on modes near with the marginal stability of the compressor is unacceptable.

About the authors

B. R. Abdullin

Ufa State Aviation Technical University

Author for correspondence.
Email: parallaksya@yandex.ru

Candidate of Science (Engineering)

Associate professor of the Department Aviation Engines

Russian Federation

R. G. Akmaletdinov

Ufa State Aviation Technical University

Email: akmar51@inbox.ru

Candidate of Science (Engineering)

Senior Lecturer, Department of Electromechanics

Russian Federation

K. S. Goumerov

Ufa State Aviation Technical University

Email: profgumerov@yandex.ru

Doctor of Science (Engineering)

Professor of the Department Aviation Engines

Russian Federation

R. R. Nigmatullin

Sharansky linear production department of main gas pipelines «Gazprom Transgaz Ufa» Ltd

Email: nrr@bk.ru

Chief engineer - deputy chief

Russian Federation

References

  1. Goumerov A.V., Akmaletdinov R.G. Сompressor blade erosion modeling // Vestnik of the Samara State Aerospace University. 2011. No. 3(27), part 2. P. 233-239. (In Russ.)
  2. Adgamov R.I., Borovik V.O., Dmitriev S.V., Kozhevnikov Y.V., Shibanov G.P. Obrabotka i analiz informatsii pri avtomatizirovannykh ispytaniyakh GTD [Processing and analysis of information in automated tests GTE]. Moscow: Mashinostroenie Publ, 1987. 126 p.
  3. Mokrous M.F Primenenie metodov diagnosticheskoy obrabotki i analiza termogazodinamicheskikh parametrov pri stendovykh ispytaniyakh aviatsionnykh GTD // Mezhvuzovskii sb. nauchnykh trudov «Ispytaniya aviatsionnykh dvigateley». V. 5. Ufa: UAI Publ., 1977. P. 29-34. (In Russ.)
  4. Vainu Ya.Ya.-F. Korrelyatsiya ryadov dinamiki [Correlation of time series]. Moscow: Statistika Publ, 1977. 119 p.

Supplementary files

Supplementary Files
Action
1. JATS XML

Copyright (c) 2015 VESTNIK of the Samara State Aerospace University

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies