Method of calculating vibrations in a pipeline with damping supports made of MR material


Cite item

Full Text

Abstract

A method of calculating vibrations in a pipeline of an arbitrary shape with damping supports made of MR material with the help of the finite element method ANSYS software is developed. The method takes into account the non-linearity of MR material, it makes it possible to determine the amplitudes of pipeline vibration and the stress in the pipeline. The calculation results are confirmed by an experiment with the ARAMIS measurement system. The method can be used for placement of pipelines.

About the authors

S. A. Bezborodov

Open joint-stock company “Kuznetsov”

Author for correspondence.
Email: bezborodovser@yandex.ru

Инженер-конструктор отдела прочности и теплофизики

Russian Federation

A. M. Ulanov

Samara State Aerospace University

Email: alexulanov@mail.ru

Доктор технических наук, доцент

Профессор кафедры конструкции и проектирования двигателей летательных аппаратов

Russian Federation

References

  1. Chegodaev D.E., Ponomarev Yu.K. Dempfirovanie [Damping]. Samara: SSAU Publ., 1997. 334 p.
  2. Kalinin N.G., Lebedev Yu.A., Lebedeva V.I. etc. Konstruktsionnoe dempfirovanie v nepodvizhnyh soedineniyah [Structural Damping in Fixed Joints]. Riga: Latvian Academy of Science Publ., 1960. 172 p.
  3. Panovko Ya.G. Vnutrennee trenie pri kolebaniyah uprugih sistem [Inner friction in vibration of elastic systems]. Moscow: Fizmatgiz Publ., 1960. 196 p.
  4. Kuzmin E.N. Research of dynamic characteristics of sleeve vibration isolators // Vibratsionnaya prochnost i nadezhnost dvigatelei i sistem letatelnyh apparatov. Kuibyshev, 1975. No. 1(68). P. 54-59. (In Russ.)
  5. Ulanov A.M., Shvetsov A.V. Mechanical characteristics of pipeline support dampers made of MR material // Vestnik SGAU. 2011. No. 3(27). P. 94-99. (In Russ.)

Supplementary files

Supplementary Files
Action
1. JATS XML

Copyright (c) 2015 VESTNIK of the Samara State Aerospace University

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies