Email this article Development methodology for a pulsation damper of gas control valves
- Authors: Kryuchkov A.1, Balyaba M.1, Ermilov M.1, Shabanov K.2
-
Affiliations:
- Samara National Research University
- Gazprom transgas Samara LLC
- Issue: Vol 3, No 2 (2016)
- Pages: 33-41
- Section: Articles
- URL: https://dynvibro.ru/dynvibro/article/view/6137
- DOI: https://doi.org/10.18287/2409-4579-2016-3-2-33-41
- ID: 6137
Cite item
Full Text
Abstract
The background for the proposed methodology is based on the principle of stage throttling with simultaneous equalizing and stabilizing the outflow, as well as elimination of gas-dynamic self-oscillating modes of the control valve. Having conducted an analysis of suppression and dampening means and according to established patterns of occurrence of self-oscillations we have suggested an integrated pulsations damper performing the following functions: elimination of gas-dynamic self-oscillations, reducing pressure pulsations in the source by reducing pressure drop, stage throttling with a reduced flow rate and outflow stabilization. A distinctive feature of our methodology is combining experimental dependencies with numerical simulation of natural modes and gas-dynamic processes taking place in the control valve and pressure pulsation damper. As initial data for designing the damper we have set its desired efficiency while ensuring specified operating modes of the gas distribution station and specified restrictions on dimensions and hydraulic resistance. The methodology allows for a significant reduction of broadband pressure pulsations and vibration by the damper due to the rational and maximum permissible distribution of pressure differences in the control valve and damper under operating conditions in which the total vibrational power of the control valve and damper is maintained close to the minimum.
About the authors
Alexander Kryuchkov
Samara National Research University
Email: kan@ssau.ru
Doctor of Sciences (Engineering), Professor, Department of Automatic Systems of Power Plants
Russian FederationMaxim Balyaba
Samara National Research University
Author for correspondence.
Email: bmw-surgut@yandex.ru
Graduate student, Department of Automatic Systems of Power Plants
Russian FederationMikhail Ermilov
Samara National Research University
Email: emasamara@gmail.com
Graduate student, Department of Automatic Systems of Power Plants
Russian FederationKonstantin Shabanov
Gazprom transgas Samara LLC
Email: K.Shabanov@samaratransgaz.gazprom.ru
Head of the technical department of Gazprom transgas Samara LLC
Russian FederationReferences
- A. Fagerlund, D. Karczub and T. Martin (2005), Identification and Prediction of Piping System Noise, Noise–Con, Minneapolis, Minnesota, 17–19 October.
- Balyaba, M.V., Ermilov, M.A. and Kryuchkov, A.N. (2017), Suppression of gas-dynamic self-oscillations in the outflow line of a gas control valve. Paper presented at the Procedia Engineering, vol. 176, pp. 577–585. doi: 10.1016/j.proeng.2017.02.300.
- J. Monsen, (2011), Valve Noise Reduction Strategies, Valin Corporation, 25 July.
- G.N. Abramovich (1976), Applied gas dynamics, Nauka, Moscow, 888 p.
- M.E. Deich (1974), Technical gas dynamics, Energia, Moscow, 592 p.
- ANSI/ISA–S75.17–1989, Control Valve Aerodynamic Noise Prediction – Approved 19–06–1991, USA: ISA, 1989, ISBN 1–55617–207–9.
- A.A. Danilov and A.I. Petrov (1997), Gas distribution stations, Nedra, St. Petersburg, 240 p.
- G.A. Chaytsyn (1971), Operation of gas distribution stations of major gas pipelines, Nedra, Moscow, 168 p.
- М.А. Ermilov, M.V. Balyaba, А.N. Kryuchkov, K.Y. Shabanov (2015), The experimental development of the pulsation damper in a gas reduction line, The 22nd International Congress on Sound and Vibration (ICSV22), Florence, Italy, 12-16 July.
- Ermilov, M.A., Kryuchkov, A.N., Balyaba, M.V., and Shabanov, K.Yu. (2015), Development of a pressure pulsation damper for gas pressure regulators with account of operation parameters. Paper presented at the Procedia Engineering, vol. 106, pp.277–283. doi: 10.1016/j.proeng.2015.06.036.
- М.А. Ermilov, M.V. Balyaba, А.N. Kryuchkov and K.Y. Shabanov (2015), Test bench for vibroacoustic research of the pneumatic system units and pipe fittings, The 22nd International Congress on Sound and Vibration (ICSV22), Florence, Italy, 12-16 July.
- I.E. Idelchik (1992), Manual for hydraulic resistance cases, Machinostoenie, Moscow, 672 p.
- FLUENT, A. 6.3, Theory Manual, Fluent Inc. Central Source Park, 10 Cavendish Court, Lebanon, NH 03766, USA, 2005, http://www.fluent.com.
Supplementary files
